101 DIY Guide

Do It Yourself Guide

Plumbing Problems Getting You Down? Read This!

If you have plumbing issues, you need to take care of the issue properly. You should always seek out suggestions and advice when you need them. In the following paragraphs, you’ll find plenty of tips that will be useful in the future.

Knowing all your different tools and how they are used will be a great help when you work on a plumbing job. You should read the manual with any new tool you purchase. If you don’t have the manual, look online or at your local library for more information. You should do the same amount of research on the steps required for your project. Before attempting any repairs, plan ahead, or you may make a costly mistake.

A bad flapper or flapper seat with too much mineral incrusted in it will let water run constantly, which will make your bills go up. You will need to purchase a new flapper and wipe off the seat that it is attached to in order to fix the problem entirely.

If a plug needs to be removed, there are a few methods you can use. The first method you can try is using a chisel with a hammer to get the fitting loose. The only other method is to take the chisel and use it right through the plug.

Don’t put oil, grease or fat into your drain. When they cool, they will harden and create clogs in your drains. They’ll also muck up your garbage disposal and cause it to be less efficient. To keep your drain running efficiently, dispose of fats and oils in other ways besides pouring them down the drain.

If you see any wear or tear on your pipes, replace them! You can make temporary fixes using foam to plug up leaks and holes, but it is, of course, temporary. For a long term fix, buy a replacement part and install it.

Whenever you have plumbing work that needs to be done, you should schedule all problems at one time. Do not call a plumber for minor issues. You can save money by waiting to have everything fixed at the same time. It is a lot more cost effective as you will only be paying for one call-out fee instead of multiple trips.

Pipes that are exposed to extreme cold in winter should be insulated. This exposure may happen to pipes in the attic, basement, or pipes in outside walls. Insulation which perfectly wraps all around the pipe can be bought. This prevents the pipe from freezing, which can cause it to burst, and also keeps your hot water from cooling down as it travels through the pipe to your faucet or shower head.

It is important to always run cold water while using your garbage disposal. Cold water keeps blades sharp and allows for smoother disposal. When you use hot water, any grease that is in the garbage will melt and be more prone to stopping up your drain.

Each month, treat your drains by pouring one cup of baking soda down it, and then follow that with a cup of regular white vinegar. Cover it with a plug or rag, because a chemical reaction is sure to occur in your pipes. Flush it with boiling water after a few minutes. This method clears out soap scum buildup and accumulated hair that gets caught in the pipes.

This article can help you know when to call a professional, and when you can tackle the problem on your own. Get the best professionals and take care of what you can so that you can save some money. Take heed of the advice that has been offered to you.

101 DIY Guide © 2017