101 DIY Guide

Do It Yourself Guide

Helpful Information For Working On Your Pipes

There are lots of things that can go wrong with plumbing. Some of these are simple and straightforward problems, others can be more complicated. Whatever your particular situation, you need to be educated about plumbing so you will know if you need to call a plumber, make sure you know a lot about plumbing so it can be fixed quickly.

Noisy pipes is an easy problem to fix. You must anchor any exposed pipes.

Do not pay anything until they finish the job. You may have to pay a portion of the cost before the plumber works on the job, but avoid paying the total amount until it’s done. You need to know the plumber completed everything that they said they would before they get your money.

If your toilet is clogged, the water level in the toilet is low, and a plunger is not doing the trick, you can sometimes fix the problem by dumping warm water into your toilet at waist level (or maybe even a little higher). Repeat this once your water returns back to a lower level.

Don’t pour cooking grease, oil or grease down your drains. This is primarily true if you are someone who has a garbage disposals because the fat can make the blades turn more slowly and less freely. Make sure you dispose of all oils away from the sink.

Pour baking soda and vinegar down your bathtub drain once a month. Plug the opening or cover it with a cloth while the chemical reaction to occur. After a few minutes, clear the pipes out with a gallon of boiling water. This procedure should help clear your pipes of hair and soap scum.

Overflow Holes

Ensure overflow holes aren’t clogged up. Clear the overflow holes when doing periodic checks for problems and things that should be addressed.

Be sure that the dryer’s lint trap. This will help your dryer operates efficiently and may also prevent fires. Be sure you inspect your lint trap for tears or holes that could mean lint is going into your pipes, because this can cause bigger problems as it may mean that lint is escaping into your pipes.

Frozen pipes can cause you money. The first thing you should do is make sure that all of the outside pipes are thoroughly wrapped or insulated. When wintertime comes, disconnect and drain the hoses and turn the outside faucet off. You can save a bunch on plumbing bills this way.

Clean the aerator to if you are dealing with low water pressure issues due to sediment build up. Take out the aerator, disassemble it, and brush it clean with a little vinegar.

Try not to use of dry cleaners as often as you can. Drain cleaners contain very corrosive chemicals that can actually damage to your pipes if used too frequently. If you discover that you have a blocked drain, have a professional plumber examine the line.

If sewage is overflowing your toilet, see if the blockage exists at the branch line which connects the sewage and main lines. If you are unable to handle the issue on your own, a plumber can put a snake through to clear it out.

You should always be aware of where the main water shut off valve is located on your home. You can locate a water meter close by or directly on it. Fixtures, such as sinks or toilets, may also have individual shut-off valves. Show everyone where these valves are, and then add markings that show how they should be turned off if an emergency occurs.

Like this article said, there are a lot of things that can happen to your plumbing. These issues can be small, or they can be big. The tips that were given here should help you fix these problems with greater ease.

101 DIY Guide © 2017